Materials / Finishes

Atlas wall panels are manufactured from high grade galvanised steel coils with a 25 μm synthetic colour coating (SP, PVDF) on the outer surface and a 15 μm protective wash coat to the inner surface. The inner skin of the sandwich panels is galvanised and has a polyester coating. Nominal thickness of exterior panels is from 0,50 mm to 0,75 mm.

Atlas-Halle

Precision Manufacture

Atlas wall panels span the sheeting rail spacing and are designed in accordance with individual country codes. Atlas wall systems are approved by DIBt (German Institute for Building Technology) and the highest building regulatory bodies of NRW (North Rhine Westphalia). Manufacture of the panels is by cold-roll forming of the finish coated steel coils on fully automated rolling mills. The continuous roll-forming process is computer controlled and checked, with the panels being cut to the exact length required on each individual project. The interior and exterior skins of the sandwich panels are roll-formed in a continuous production process and are bound together by means of a PU foam core to form a high load-bearing wall panel with an excellent insulation value.

Quality Control

Quality assurance conforms to the requirements of the approval authorities as well as Quality Standard EN 29001/ISO 9001.

Dimensions

Atlas wall panels are manufactured accordingly to the lengths required by the manufacturing drawings. The panel width can be between 1000 mm and 1100 mm.

Surface protection for roof and wall panels

(press button to scale up)

>> back

Logo: Apollo-Hallen